SELF LOCATING SHOCK MOUNTS STANDARD (PAIR)

£48.00

Description

Our Latest “Self Locating” rear shock mounts
are designed to make fitment simple.
No measuring is required as they fit by sight only.
See instructions below.
They allow the fitment of telescopic shock absorbers (only) and will work with any Bay Bus based IRS conversions. The 90 degree rotated top mount, allows shocks to work without binding under varying height conditions.

Note:
Your original Split bus upper shock mount should only be used on stock rear axles with reduction boxes.
This is because Swing Axles and IRS conversions place the lower shock mount in a completely different location than the original factory location.
To avoid damage to your shocks, a new mount needs to be positioned in a suitable location to prevent this. In addition, we have rotated the upper bolt orientation by 90 degrees to prevent the shock from bending on any rear suspension layout.

 

STANDARD – Suits Stock Height to 4″ Drop – No trimming of inner wheel arch required.

 

FITTING INSTRUCTIONS

Additional information

Weight 1 kg
Dimensions 30 × 20 × 20 cm
TYPE

STANDARD, SLAMMED