This is the Spring Plates you will need if you have a standard Splitscreen Rear Suspension with Reduction boxes but wish to have height adjustability. This can be helpful if your bus has settled with one side lower than the other and just needs to be levelled. Easy to install and allow infinite adjustment.
We had an original VW spring plate analysed for material contact and tensile strength before selecting the modern day equivalent. We then laser cut the material for accuracy. A CNC machined broached boss is then TIG welded into the spring plate. Take a look at the quality of welding its a work of art ! Adjustors allow careful dialling in of wheel clearance after fitment. Features handbrake cable hole for stock cable use. Supplied with new rubber donuts and packing spacers.
If you run reduction boxes please be aware that the lower you go the more Negative Camber
you will end up with. This results in oil starvation to the reduction gears and mechanical failure.
It is impossible for us to guarantee your wheel will come off without removing the rear shock
on any lowered bus as there are to many variables in height and tyre choice